Learn more about the usage of our test systems.
Test plans, software functions, extensions.
Here you find application notes that show special functions and applications.
This application note describes different standard tasks, as parameter tests and cycle life tests. Detailed examples show the usage of cycle counters, sampling rate, and termination criteria. Additionally the usage of the internal data analyses is shown. Go to the Application Note and to the Test Plans.
This application note shows the differential Voltage Analyses (DVA) by use of a BaSyTec battery test system. The download contains the report and the test plans.
In this collection of test plans you find examples where the deviation of signals and a reference current are used. Additionally it is shown how the efficiency of a battery can be measured. Download of the Test Plans.
The report describes how charging with a charging factor is possible and how a reference capacity can be used in a test plan. In the shown example the real battery capacity is measured every 50 cycles and the cycle depth (here 60%) is adapted to the real battery capacity. Here you can download the Application Note and the Test Plans.
This application note describes how different charge protocols can be programmed within the BaSyTec battery test system. Go to the Application Note.
This application note describes how battery safety circuits can be tested with a BaSyTec Test System. Go to the Application Note.
This application note describes how to simulate a measured load profile (here the screwing process) on the BaSyTec test equipment.Go to the Application Note.
This application note describes discharge tests with fast pulse loads, as these are known from communication protocols (i.e. GSM). Go to the Application Note.
This application note describes the use of climate chambers within the BaSyTec software. Additionally all supported climate chambers are listed. Go to the Application Note.
The grading of cells is a typical task for a receiving inspection (begin of line test). Battery packs manufactured by selected cells result in a more homogeneous operation of the pack (and the cells within the pack) what is important to guaranty a long lifetime. Within this application note a method for cell grading is described. This method uses the digital IO ports to display the cell grade. Go to the Application Note.
How to do Cyclic Voltammetry with a BaSyTec Test System?
(not for CTS). Go to the application note.